1- take-off device is off the ring type conveyor belt with guide strip and without any union or joint, and equips with printer. Take-off conveyor belt, lifting and dip-in wire mesh belt all share one same freauency conversion AC speed regulating motor, which the conveying speed could be adjustable. 2- lifting bar is driven by one set cycloid pin wheel speed reducer through AC frequency conversion and the bar speed is synchronous as the speed of lifting device. 3- the sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying. 4- the hanging up area is fully closed, which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect.
No
|
Model
|
XPG-600
|
XPG-800
|
XPG-900
|
1
|
Max. Rubber Sheet Width (mm)
|
600
|
800
|
900
|
2
|
Rubber Sheet thickness (mm)
|
4-10
|
4-10
|
6-12
|
3
|
Temperature over room temperature after rubber sheet cooling (℃)
|
10
|
15
|
5
|
4
|
Linear Speed of taking-in conveyor (m/min)
|
3-24
|
3-35
|
4-40
|
5
|
Linear speed of sheet-hanging chain (m/min)
|
0.82
|
0.117-1.17
|
4-40
|
6
|
Hanging height of the sheet hanging bar (m)
|
1000-1500
|
1000-1500
|
1400
|
7
|
No. of cooling fans (set)
|
12
|
20
|
18-26
|
8
|
Total power (KW)
|
13.7
|
28.8
|
18-34
|